About this file
This is a dump of the DL501 gearbox control unit. Software number 0010088K, firmware version 2927156G.
Typical use: writing the unit after a failed flash, restoring lost software, or replacing the mechatronic when the label shows the same software number and the same version.
Archive contents
| Full backup |
vag_temic_dl501gen2_bench_fullbackup_0400848202008e393408001022000100_20221118073308_fullbackup.mmf |
526 496 bytes |
| Flash |
vag_temic_dl501gen2_bench_fullbackup_0400848202008e393408001022000100_20221118073308_int_flash.bin |
2 621 440 bytes |
| Internal EEPROM |
vag_temic_dl501gen2_bench_fullbackup_0400848202008e393408001022000100_20221118073308_int_eeprom.bin |
131 072 bytes |
| External EEPROM |
vag_temic_dl501gen2_bench_fullbackup_0400848202008e393408001022000100_20221118073308_ext_eeprom.bin |
8 192 bytes |
How to use
- Pay for the file. The download button appears on this page and a copy is sent by email.
- Open the archive in your programmer and check the checksum before writing.
- Write only to a DL501 unit with software 0010088K and version 2927156G.
Before writing
Check software number 0010088K and version 2927156G against the unit label. Writing this file into a unit with different numbers can damage the unit. If you need another version of this software, choose it below or search the catalog.