About this file
This is a dump of the DQ250 gearbox control unit. Software number 02E300052H, firmware version 2209.
Typical use: writing the unit after a failed flash, restoring lost software, or replacing the mechatronic when the label shows the same software number and the same version.
Archive contents
| Full backup |
vag_temic_dq250-mqb_bench_fullbackup_000000000ea0a551820600102701ec00_20260904122024_fullbackup.mmf |
356 560 bytes |
| Flash |
vag_temic_dq250-mqb_bench_fullbackup_000000000ea0a551820600102701ec00_20260904122024_int_flash.bin |
1 540 096 bytes |
| Internal EEPROM |
vag_temic_dq250-mqb_bench_fullbackup_000000000ea0a551820600102701ec00_20260904122024_int_eeprom.bin |
131 072 bytes |
| External EEPROM |
vag_temic_dq250-mqb_bench_fullbackup_000000000ea0a551820600102701ec00_20260904122024_ext_eeprom.bin |
8 192 bytes |
How to use
- Pay for the file. The download button appears on this page and a copy is sent by email.
- Open the archive in your programmer and check the checksum before writing.
- Write only to a DQ250 unit with software 02E300052H and version 2209.
Before writing
Check software number 02E300052H and version 2209 against the unit label. Writing this file into a unit with different numbers can damage the unit. If you need another version of this software, choose it below or search the catalog.