About this file
This is a dump of the DQ500 gearbox control unit. Software number 0BT300011P, firmware version 1814.
Typical use: writing the unit after a failed flash, restoring lost software, or replacing the mechatronic when the label shows the same software number and the same version.
Archive contents
| Full backup |
vag_continental_dq500_bench_fullbackup_81800a890340a4588206001027f8eb00_20251031100732_fullbackup.mmf |
1 048 784 bytes |
| File |
vag_continental_dq500_bench_fullbackup_81800a890340a4588206001027f8eb00_20251031100732_maps.bin |
1 540 096 bytes |
| Internal EEPROM |
vag_continental_dq500_bench_fullbackup_81800a890340a4588206001027f8eb00_20251031100732_int_eeprom.bin |
131 072 bytes |
How to use
- Pay for the file. The download button appears on this page and a copy is sent by email.
- Open the archive in your programmer and check the checksum before writing.
- Write only to a DQ500 unit with software 0BT300011P and version 1814.
Before writing
Check software number 0BT300011P and version 1814 against the unit label. Writing this file into a unit with different numbers can damage the unit. If you need another version of this software, choose it below or search the catalog.