About this file
This is a dump of the DQ500 gearbox control unit. Software number 0DL300012N, firmware version 2110.
Typical use: writing the unit after a failed flash, restoring lost software, or replacing the mechatronic when the label shows the same software number and the same version.
Archive contents
| Full backup |
vag_bosch_dq500_bench_fullbackup_e31f7e4298155bc3_1034420266_20231123155752_fullbackup.mmf |
904 480 bytes |
| File |
vag_bosch_dq500_bench_fullbackup_e31f7e4298155bc3_1034420266_20231123155752_maps.bin |
2 621 440 bytes |
| Internal EEPROM |
vag_bosch_dq500_bench_fullbackup_e31f7e4298155bc3_1034420266_20231123155752_int_eeprom.bin |
131 072 bytes |
How to use
- Pay for the file. The download button appears on this page and a copy is sent by email.
- Open the archive in your programmer and check the checksum before writing.
- Write only to a DQ500 unit with software 0DL300012N and version 2110.
Before writing
Check software number 0DL300012N and version 2110 against the unit label. Writing this file into a unit with different numbers can damage the unit. If you need another version of this software, choose it below or search the catalog.