About this file
This is a dump of the DQ500 gearbox control unit. Software number 0DL300045B, firmware version 1450.
Typical use: writing the unit after a failed flash, restoring lost software, or replacing the mechatronic when the label shows the same software number and the same version.
Archive contents
| Full backup |
vag_bosch_dq381_bench_fullbackup_aa84d47d31a73098_1034420239_20260305184450_fullbackup.mmf |
905 744 bytes |
| File |
vag_bosch_dq381_bench_fullbackup_aa84d47d31a73098_1034420239_20260305184450_maps.bin |
2 621 440 bytes |
| Internal EEPROM |
vag_bosch_dq381_bench_fullbackup_aa84d47d31a73098_1034420239_20260305184450_int_eeprom.bin |
131 072 bytes |
How to use
- Pay for the file. The download button appears on this page and a copy is sent by email.
- Open the archive in your programmer and check the checksum before writing.
- Write only to a DQ500 unit with software 0DL300045B and version 1450.
Before writing
Check software number 0DL300045B and version 1450 against the unit label. Writing this file into a unit with different numbers can damage the unit. If you need another version of this software, choose it below or search the catalog.